High performance CPU cooler for Socket 370/478*, Socket A CPUs HeatlaneZen CPU Radiator SCR325-2F  
 
*ZADP478-01 is necessary for Socket 478Socket478

  Excellent performance
    Because of the Heatlane™ technology, This CPU cooler achieved the most prominent performance among existing air-cooled systems. It also offers much superior performance than conventional CPU coolers including those made of copper. (Confirmed by measurements performed at our company. Weight ratio)
Compatible up to Socket478 3.06GHz and SocketA 3000+.
     
  Original Clip
    We have made it more convenient to attach and remove the cooler to/from the CPU socket. Our original catch configuration reduces the risks of damage to a motherboard and other parts that can be caused by a screwdriver or other tools because no tools are required for installation. (Patent pending)
     
  Light weight
    The core part (Heatlane™ Radiator) is made of aluminum and thus is lighter than the high-performance copper CPU cooler. Reduces the physical load on the CPU.

>>>>>>>Performance
Measurement
conditions
CPU : AMD Athlon1.4GHz
Motherboard : GigaByte GA-7DXR
OS : Windows Me
Sensor : Motherboard thermister
Thermometric software : SIV, Benchmark
Software : Super Pi (2,090K digits calculation)
OAT : 28oC
Performance is an average value. This value varies slightly depending on the model.
　
Measurement conditions
CPU : Intel Pentium4 2.0GHz(Willamette)
Motherboard : ASUS P4B
OS : Windows Me
Sensor : Motherboard thermister
Thermometric software : ASUS PC Probe
Software : Super Pi (2,090K digits calculation)
OAT : 22oC
Performance is an average value. This value varies slightly depending on the model.

>>>>>>>Specifications

Case
Housing dimensions: W90×D86×H76mm
Housing and clip cover material: ABS resin
Clip material: Nylon 66 resin
 
Heatlane™ Radiator
Model: SCR325
Dimensions: W64×D32×H60mm
Material: Aluminum
Weight: Approx. 135g
Working fluid (coolant): HFC-134a
Heat spreader: 32×32mm（copper + nickel plated）
Fin: Corrugated fin with louver (aluminum)
Fan
Manufacturer: Minebea Co., Ltd.
Model: 2406KL-04W-B59
Dimensions: 60x60x15mm
Fan speed: 4,600 RPM
Maximum wind force: 0.52m3/min.
Maximum static pressure: 51.2 Pa
Life expectancy: 70,000 hours (25oC)
   
Total weight
350g
Thermal resistance

Click here.

>>>>>>>Caution

This product comes as an assembly kit. Procure a Phillips screwdriver (Parts photo)
　 (Thermal grease is included.)
Be sure to read the User’s Guide supplied with the product before you start using it.(PDF 276KB)
How to install
  Flash Animation
    START(480 x 360)
    START(600 x 450)
    START(720 x 540)
  QuickTime Movie(4.24MB)

>>>>>>>Warranty

This product is a cooler unit designed for Socket 370* and Socket A of a CPU to be installed in a personal computer (desktop PC). TS Heatronics shall not be liable and assumes no responsibility whatsoever for accidents and damages caused by the use of the product for a purpose other than the above.
*ZADP478-01 is necessary to install SCR325-2F on Socket 478 CPUs.
This product has been manufactured for a general consumer. If you want to use it for a business application, contact TS Heatronics for instructions.
If you remove the original cooler of your CPU, the warranty of this CPU will become void. Repalce the original cooler with this product at your own discretion. We assume no liability an provide no warranty for any mechanical damage of parts including a motherboard, CPU, memory, graphics and for any software damage including data and programs in the hard drive.
We have designed this product with adequate consideration for clock upgrades. This design measure, however, does not guarantee operations other than those specified by individual manufacturers. Perform a clock upgrade at your own discretion.
In some cases, you may notice scratches on the Heatlane™ Radiator, which is part of this product This scratches often occur during the manufacturing process and will not affect the performance of this product in any way. Similarly, the top dent can be dented by the leaf spring while you assemble this product. This denting will not affect the performance of this product either.
We will replace this product with a new one only if it is found to be defective.

>>>>>>>Dimensions necessary for installation (front of installation)
When there is a space 12mm wide or more in front of the socket clasp ( portion)
　 Minimum required dimensions: W80xD76mm or more
When there is no space 12mm wide or more in front of the socket clasp
　 Minimum required dimensions: W86mmxD76mm or more (among blue closing line)
This product is not compatible with PPGA or FC-PGA2
Compatible Motherboards (Partly in Japanese)


Socket 478 adaptor for Socket370/A CPU cooler Zen 478 Adaptor ZADP478-01  

User' s Guide
(PDF 113KB)
 
This is an accessory to install SCR325-2F on Socket 478 CPUs. You may not be able to use the Zen 478 Adaptor on some motherboard types and shapes. Before purchasing this product, be sure to check the following matters.
　 　
To install this product, there must be a clearance of at least 5mm between the PC housing and motherboard.
You can not use this product if the CPU socket is assembled in the manner shown in the figure (below right) in relation to the heat sink installation holes.


(Click to enlarge)

You may not be able to attach this product if an IC or other part is mounted on front and/or back of the motherboard.

Motherboard front (Socket surroundings)
Motherboard back (Socket surroundings)

There must be no IC or any obstacle of over 3mm height on the blue area of the motherboard.There must be no any obstacle on the red area.
There must be no any obstacle on the red area of the motherboard.
>>>>>>>Reviews

ASCII24「AKIBA2GO!」 2001/09/06

Impress「AKIBA PC Hotlilne!」 2001/09/08

Impress「AKIBA PC Hotlilne!」 2001/12/22


Copyright 2002 TS Heatronics Co,. LTD. All rights reserved.